INSTALLATION INSTRUCTIONS
1 of 6
GS
FLTW-7511
2015-Current Ford F-150 Black Handle with Camera
Kit Contents:
Tools Required:
Tailgate Handle with Camera
Chassis Harness with RCA
1 bag containing:
Template (along with these instructions)
T30 Torx Driver
8mm and 10mm Sockets
Flat Head Screwdriver
Phillips Screwdriver
Plastic Trim Removal tool
Drill Bit (if needed)
1 inch Center Hole Saw
Soldering Iron
Small brush
Round file (if needed)
Deburring Tool
PRE-INSTALLATION VEHICLE CHECKLIST
Before beginning,
determine how the vehicle is equipped and check appropriate boxes:
Determine whether the vehicle has an opening in the center of pickup bed close to opposite of the opening in the
bottom of the tailgate.
□
YES
, skip Section 1.
□
NO
, tailgate must be removed to drill an opening for the camera harness (refer to Section 1).
□
Check kit contents are complete against the list above.
