1
FEATURES OF YOUR HYUNDAI
23
o Before folding the seatback, insert
the buckle in the pocket. This can
prevent the buckle from being dam-
aged by the seatback.
B110A01MC
!
B110A02MC-AAT
Folding Rear Seatbacks
(If Installed)
The rear seatbacks may be folded to
facilitate carrying long items or to in-
crease the luggage capacity of the
vehicle.
WARNING:
The purpose of the fold-down rear
seatbacks is to allow you to carry
longer objects than could otherwise
be accommodated.
Never allow passengers to sit on top
of the folded down seatback or cargo
area while the car is moving as this
is not a proper seating position and
no seat belts are available for use.
This could result in serious injury or
death in case of an accident or sud-
den stop. Objects carried on the
folded down seatback should not
extend higher than the top of the
front seats. This could allow cargo to
slide forward and cause injury or
damage during sudden stops.
To fold down the seatback :
1. Slide the front seats forward and
adjust the front seatbacks to be up-
right before folding the rear seatbacks
down.
2. Lower the rear seat headrests to the
lowest position.
B220D05MC
CAUTION:
!
o In order to prevent the center shoul-
der belt from being damaged while
folding the rear seat, disconnect
the metal tab (A) from the buckle
(B). To disconnect the metal tab (A)
from the buckle (B) , insert a nar-
row-ended tool into the groove lo-
cated on the buckle (B) (If Installed).
Summary of Contents for 2010 Accent
