manualshive.com logo in svg

Hyundai 2010 Accent, Owner'S Manual, Page: 98 / 284

Share
Download
Hyundai 2010 Accent Owner'S Manual Download Page 98

1

FEATURES OF YOUR HYUNDAI

86

OMC025034

!

WARNING:

Use caution when using the drink
holders. A spilled beverage that is
very hot can injure your passengers.
Spilled liquids can damage interior
trim.

B450B01MC-GAT

REAR DRINK HOLDER
(If Installed)

The rear drink holder is located in the
rear seat armrest for holding cups or
cans.
The rear drink holder can be used by
pulling the rear seat armrest.

DRINK HOLDER

ASHTRAY

To use the ashtray, open the cover. To
remove the ashtray to empty or clean it,
pull it all the way out.

B430A01MC-GAT

OMC025108

OMC025103

!

B450A02O-AAT

FRONT DRINK HOLDER

The drink holder is located on the main
console for holding cups or cans.

WARNING:

o Use caution when using the drink

holders. A spilled beverage that is
very hot can injure you or your
passengers. Spilled liquids can
damage interior trim and electri-
cal components.

o Do not place objects other than

cups or cans in the drink holder.
This objects can be thrown out in
the event of a sudden stop or an
accident, possibly injuring the pas-
sengers in the vehicle.

Summary of Contents for 2010 Accent





























































































































































































































































































Reviews:

No comments