Hyundai 2010 Accent, Owner'S Manual

Page: 25 / 284

1
FEATURES OF YOUR HYUNDAI
13
B070E02MC-AAT
Replacing the battery
When the transmitter's battery begins
to get weak, it may take several pushes
on the button to lock or unlock the
doors, and the LED will not light. Re-
place the battery as soon as possible.
Battery type : CR1220
1. Remove the screw with a phillips
screwdriver.
2. Carefully separate the case with a
flat-head screwdriver.
3. Remove the battery cover with a coin.
OMC025004
- The weather is extremely cold.
- The transmitter is close to a radio
transmitter such as a radio station
or an airport which can interfere
with normal operation of the trans-
mitter.
When the transmitter does not work
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, con-
tact an authorized Hyundai Dealer.
NOTE:
Keep the transmitter away from wa-
ter or any liquid. If the keyless entry
system is inoperative due to expo-
sure to water or liquids, it will not be
covered by your manufacturer ve-
hicle warranty.
Replacement instructions:
B070F03A-GAT
Keyless Entry System
(If Installed)
Locking doors
1. Close all doors.
2. Push the button on the transmitter.
3. At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Unlocking doors
1. Push the button on the transmitter
once more after all doors were locked.
2. At the same time all doors unlock,
the turn signal lights will blink twice
to indicate that the system is dis-
armed.
NOTE:
The transmitter will not work if any of
following occur:
- The ignition key is in ignition
switch.
- You exceed the operating distance
limit (10 m).
- The battery in the transmitter is
weak.
- Other vehicles or objects may be
blocking the signal.