background image

1

FEATURES OF YOUR HYUNDAI

40

B230D02MC-GAT

Using a Child Restraint System
with "ISOFIX" System and
"Tether Anchorage" System

ISOFIX is a standardised method of
fitting child seats that eliminates the
need to use the standard adult seat belt
to secure the seat in the vehicle. This
enables a much more secure and posi-
tive location with the added benefit of
easier and quicker installation.

An ISOFIX-seat can only be installed if
it has vehicle-specific approval in ac-
cordance with the requirements of ECE-
R44. For your Hyundai, the Hyundai
ISOFIX GR1 / Hyundai Duo / Römer
ISOFIX GR1 and the Römer Duo ISOFIX

B230D01MC

/ Britax Duo ISOFIX  is approved ac-
cording to the requirement ECE-R44.
This seat has been tested extensively
by Hyundai and is recommended for
your Hyundai.

NOTE:

At present, this seat is the only one
complying with that provision. In
case that other manufacturers will
furnish proof of a respective certifi-
cation, Hyundai is going to evaluate
this seat carefully and will give a
recommendation provided that seat
complies to the law. Please ask your
Hyundai dealer in this respect.

OMC029201N

ISOFIX
Anchor

ISOFIX Anchor
Position Indicator

On each side of the rear seat, between
the cushion and backrest, are located a
pair of ISOFIX anchorage points to-
gether with a top tether mounting on the
rear seat package tray (4 Door) or the
rear floor panel (3 Door).
During the installing, the seat has to be
engaged at the anchorage-points in a
way you can hear it clicking (check by
pulling!) and has to be fixed with the Top
Tether-belt on the belonging point of the
rear seat package tray (4 Door) or rear
floor panel (3 Door). The installing and
the use of a child-seat has to be done
according to the installing-manual,
which is added to the ISOFIX-seat.

NOTE:

An ISOFIX-child-seat can only be
installed if the seat has a vehicle-
specific approval according to ECE-
R44. Before using the ISOFIX-child-
seat, which was bought for another
car, ask your Hyundai-dealer whether
this seat-type is approved and rec-
ommended for your Hyundai.

Summary of Contents for 2010 Accent





























































































































































































































































































Reviews: