manualshive.com logo in svg

Hyundai 2010 Accent, Owner'S Manual

The Hyundai 2010 Accent Owner's Manual is a comprehensive guide that provides essential information and instructions for owners of this popular vehicle model. It can be easily downloaded for free from our website, ensuring that you have quick access to this essential manual whenever you need it.

Share
Download
background image

7

EMISSION CONTROL SYSTEMS

2

EMISSION CONTROL
SYSTEM

H010A01A-GAT

(If Installed)

Your Hyundai is equipped with an
emission control system to meet all
requirements of the Emission prohibi-
tion rules of your province.
There are three emission control sys-
tems which are as follows.

1) Crankcase emission control sys-

tem

2) Evaporative emission control sys-

tem

3) Exhaust emission control system

In order to assure the proper function
of the emission control systems, it is
recommended that you have your car
inspected and maintained by an au-
thorized Hyundai dealer in accordance
with the maintenance schedule in this
manual.

H010B01A-AAT

1. Crankcase Emission Control

System

The positive crankcase ventilation
system is employed to prevent air
pollution caused by blow-by gases
being emitted from the crankcase.
This system supplies fresh air to the
crankcase through the air intake hose.
Inside the crankcase, the fresh air
mixes with blow-by gases, which then
pass through the PCV valve  and into
the induction system.

H010C02E-GAT

2. Evaporative Emission

Control System

The Evaporative Emission Control
System is designed to prevent fuel
vapors from escaping into the atmo-
sphere.

Canister

Fuel vapors generated inside the fuel
tank are absorbed and stored in the
canister. When the engine is running,

the fuel vapors absorbed in the can-
ister are drawn into the induction sys-
tem through the purge control sole-
noid valve.

Purge Control Solenoid Valve
(PCSV)

The purge control solenoid valve is
controlled by the Engine Control Mod-
ule (ECM); when the engine coolant
temperature is low during idling, the
PCSV closes so that evaporated fuel
is not taken into the engine. After the
engine warms-up during ordinary driv-
ing, the PCSV opens so as to intro-
duce evaporated fuel to the engine.

H010D01A-AAT

3. Exhaust Emission Control

System

The exhaust emission control system
is a highly effective system which
controls exhaust emission while main-
taining good vehicle performance.

Summary of Contents for 2010 Accent





























































































































































































































































































Reviews:

No comments

Related manuals for 2010 Accent

Yakima K618 Instructions Manual preview
K618
Brand: Yakima Pages: 11
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
Rostra RearSight 250-8308 Installation Instructions preview
RearSight 250-8308
Brand: Rostra Pages: 2
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Curtis 1POLXP1000RP Installation & Owner'S Manual preview
1POLXP1000RP
Brand: Curtis Pages: 6
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
Mitsubishi MOTORS OUTLANDER PHEV 2022 Manual preview
OUTLANDER PHEV 2022
Brand: Mitsubishi MOTORS Pages: 8
Tobe EPS-LD SafePark Technical Data preview
EPS-LD SafePark
Brand: Tobe Pages: 2
LedGlow Advanced Million Color Installation Instructions preview
Advanced Million Color
Brand: LedGlow Pages: 4
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3

Brands by name

Popular brands

Load more brands