manualshive.com logo in svg

Hyundai 2010 Accent, Owner'S Manual, Page: 186 / 284

Share
Download
Hyundai 2010 Accent Owner'S Manual Download Page 186

2

 DRIVING YOUR HYUNDAI

24

TRAILER OR VEHICLE
TOWING

C190A03A-GAT

If you are considering towing with your
car, you should first check with your
Province Department of Motor Vehicles
to determine their legal requirements.
Since laws vary from province to prov-
ince, the requirements for towing trail-
ers, cars, other types of vehicles, or
apparatus may differ. Ask your Hyundai
dealer for further details before towing.

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combi-
nation, making sure that it's location is
compatible with that of the trailer or
vehicle being towed.
Use a quality non-equalizing hitch which
distributes the tongue load uniformly
throughout the chassis.

The hitch should be bolted securely to
the car and installed by a qualified
technician. DO NOT USE A HITCH
DESIGNED FOR TEMPORARY IN-
STALLATION AND NEVER USE ONE
THAT ATTACHES ONLY TO THE
BUMPER.

!

CAUTION

Do not do any towing with your car
during its first 2,000 km (1,200 miles)
in order to allow the engine to prop-
erly break in. Failure to heed this
caution may result in serious en-
gine or transaxle damage.

NOTE - For Europe

o The technically permissible maxi-

mum load on the rear axle(s) may
be exceeded by not more than 15
% and the technically permissible
maximum laden mass of the ve-
hicle may be exceeded by not more
than 10 % or 100 kg (220.4 lbs),
whichever value is lower. In this
case, do not exceed 100 km/h (62.1
mph) for vehicle of category M1 or
80 km/h (49.7 mph) for vehicle of
category N1.

o When a vehicle of category M1 is

towing a trailer, the additional load
imposed at the trailer coupling
device may cause the tire maxi-
mum load ratings to be exceeded,
but not by more than 15 %. In this
case, do not exceed 100 km/h (62.1
mph) and increase the tire infla-
tion pressure by at least 0.2 bar.

Summary of Contents for 2010 Accent





























































































































































































































































































Reviews:

No comments