manualshive.com logo in svg

Hyundai 2009 Entourage, Owner'S Manual

The Hyundai 2009 Entourage Owner's Manual is a comprehensive guide that covers every aspect of operating this reliable minivan. With user-friendly instructions and helpful diagrams, this manual is a must-have for all Entourage owners. Download your free copy from manualshive.com and unlock a wealth of valuable information right at your fingertips.

Share
Download
background image

3 57

Features of your vehicle

A driver position memory system is pro-
vided to store and recall the driver seat,
outside rearview mirror and adjustable
pedal positions with a simple button
operation. By saving the desired posi-
tions into the system memory, different
drivers can reposition the driver seat,
outside rearview mirror and adjustable
pedals based upon their driving prefer-
ence.
If the battery is disconnected, the posi-
tion memory will be lost and the driving
positions must be restored in the system.

Storing positions into memory
using the buttons on the door

Storing driver’s seat positions

1. Shift the transaxle lever into P while

the ignition switch is ON.

2. Adjust the driver seat, outside

rearview mirror and adjustable pedal
to positions comfortable for the driver.

3. Press the M button on the control

panel. The system will beep once.

4. Press one of the memory buttons (1 or

2) within 5 seconds after pressing the
M button. The system will beep twice
when memory has been successfully
stored.

WARNING

- Cargo

Cargo should always be secured to
prevent it from being thrown about
the vehicle in a collision and caus-
ing serious injury to the vehicle
occupants. Special care should be
taken of objects placed in the rear
seats, since those may strike the
front seat occupants in a frontal
collision.

WARNING - 

Cargo loading

Make sure the engine is off, the
transaxle is in P and the parking
brake is applied whenever loading
or unloading cargo. Failure to take
these steps may allow the vehicle to
move if the shift lever is inadver-
tently moved to another position.

DRIVER POSITION MEMORY SYSTEM (IF EQUIPPED)

WARNING 

Never attempt to operate the driver
position memory system while the
vehicle is moving.
This could result in loss of control,
and an accident causing death,
serious injury, or property damage.

1VQA2064

Summary of Contents for 2009 Entourage



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Entourage

Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Mercedes-Benz 2013 C-Class Coupe Owner'S Manual preview
2013 C-Class Coupe
Brand: Mercedes-Benz Pages: 388
Standby L54 Manual preview
L54
Brand: Standby Pages: 10
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
RBP STEALTH POWER RBP-216-SP Installation Manual preview
STEALTH POWER RBP-216-SP
Brand: RBP Pages: 16
HURST STREET SUPER SHIFTER Installation Instructions preview
STREET SUPER SHIFTER
Brand: HURST Pages: 2
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
SCC Quik Grip Installation And Removal Instructions preview
Quik Grip
Brand: SCC Pages: 4
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
RAM RAM C 2013 Specification preview
RAM C 2013
Brand: RAM Pages: 5

Brands by name

Popular brands

Load more brands