manualshive.com logo in svg

Hyundai 2009 Entourage, Owner'S Manual

The Hyundai 2009 Entourage Owner's Manual is a comprehensive guide that covers every aspect of operating this reliable minivan. With user-friendly instructions and helpful diagrams, this manual is a must-have for all Entourage owners. Download your free copy from manualshive.com and unlock a wealth of valuable information right at your fingertips.

Share
Download
background image

Features of your vehicle

66

3

There will be an audible “click” when the
tab locks in the buckle. The seat belt
automatically adjusts to the proper length
only after the lap belt is adjusted manu-
ally so that it fits snugly around your hips.
If you lean forward in a slow, easy
motion, the belt will extend and let you
move around. If there is a sudden stop or
impact, the belt will lock into position. It
will also lock if you try to lean forward too
quickly.

When using the rear center seat belt, the
buckle with the “CENTER” mark must be
used.

To unfasten the rear center seat belt 

1. Press the release button on the buckle

(D) and remove the tongue plate (B)
from the buckle (D).

2. Retract the rear center seat belt.

WARNING

When using the rear seat center
belt, you must lock all tongue plates
and buckles. If any tongue plate or
buckle is not locked, it will increase
the chance of injury in the event of
collision.

OVQ036226N

1VQH3904

Summary of Contents for 2009 Entourage



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Entourage

Jeep Renegade Owner'S Handbook Manual preview
Renegade
Brand: Jeep Pages: 212
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
AutoLoc SB3PR Series User Manual And Installation Manual preview
SB3PR Series
Brand: AutoLoc Pages: 6
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Reimo TOUR EASY 4 936550 Quick Start Manual preview
TOUR EASY 4 936550
Brand: Reimo Pages: 4
Lincoln 2017 MKC Owner'S Manual preview
2017 MKC
Brand: Lincoln Pages: 538
MayPole BC2085 Manual preview
BC2085
Brand: MayPole Pages: 3
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43
E-Lead EL-HA1 Manual preview
EL-HA1
Brand: E-Lead Pages: 11
G-Tech Pro Competition User Manual preview
Pro Competition
Brand: G-Tech Pages: 180
Volvo XC60 2009 Owner'S Manual preview
XC60 2009
Brand: Volvo Pages: 304
Safe Fleet PRIME DESIGN HRR-E-PM52 Manual preview
PRIME DESIGN HRR-E-PM52
Brand: Safe Fleet Pages: 12
Valeo 632201 Instruction Manual preview
632201
Brand: Valeo Pages: 76
Cadillac XT4 2023 Owner'S Manual preview
XT4 2023
Brand: Cadillac Pages: 362
Chevrolet Express 2004 Owner'S Manual preview
Express 2004
Brand: Chevrolet Pages: 406
Rajant BreadCrumb DX2 Series Quick Start Manual preview
BreadCrumb DX2 Series
Brand: Rajant Pages: 11

Brands by name

Popular brands

Load more brands