Hyundai 2009 Entourage Owner'S Manual Download Page 72 | Manualshive

Page: 72 / 402

Hyundai 2009 Entourage Owner'S Manual Download Page 72

Features of your vehicle

56

3

3. Make sure the catches are locked in

position by moving the seat forward
and backward or lifting the front por-
tion of the seat. If the seat moves, it is
not locked properly.

4. Pull out the folding strap.
5. Lift and pull the seatback backward

firmly until it clicks into place.

Make sure the seatback is locked in
place.

6. Return the rear safety belt to the prop-

er position.

OVQ036223N

CAUTION

- Rear seat belts

When returning the rear seatbacks
to the upright position, remember
to return the rear shoulder belts to
their proper position. Routing the
seat belt webbing through the rear
seat belt guides will help keep the
belts from being trapped behind or
under the seats.

CAUTION -

Avoid damag-

ing rear seat belt buckles

When you fold the rear seatback or
put luggage on the rear seat cush-
ion, insert the buckle in the pocket
between the rear seatback and
cushion. Doing so can prevent the
buckle from being damaged by the
rear seatback or luggage.

1VQA2074B

1VQA2190A

1VQA2074C

2nd row

3rd row

CAUTION

Before changing seat position, slip
the seat belt into the trim panel and
close the power outlet cap.

«
...
70
71
72
73
74
...
»

Summary of Contents for 2009 Entourage



















































































































































































































































































































































































































Reviews:

No comments