manualshive.com logo in svg

Hyundai 2009 Entourage, Owner'S Manual, Page: 145 / 402

Share
Download
Hyundai 2009 Entourage Owner'S Manual Download Page 145

3 129

Features of your vehicle

Lighting control

The light switch has a Headlight and a
Parking light position.
To operate the lights, turn the knob at the
end of the control lever to one of the fol-
lowing positions:
(1) OFF position
(2) Parking light position
(3) Headlight position
(4) Auto light position (if equipped)

Parking light position (

)

When the light switch is in the parking
light position (1st position), the tail, posi-
tion, license and instrument panel lights
are ON.

Headlight position (

)

When the light switch is in the headlight
position (2nd position) the head, tail,
position, license and instrument panel
lights are ON.

1VQA2129

1VQA2130

1VQA2131

Summary of Contents for 2009 Entourage



















































































































































































































































































































































































































Reviews:

No comments