manualshive.com logo in svg

Hyundai 2009 Entourage, Owner'S Manual

The Hyundai 2009 Entourage Owner's Manual is a comprehensive guide that covers every aspect of operating this reliable minivan. With user-friendly instructions and helpful diagrams, this manual is a must-have for all Entourage owners. Download your free copy from manualshive.com and unlock a wealth of valuable information right at your fingertips.

Share
Download
background image

3 85

Features of your vehicle

OVQ028077

B240B05L

CAUTION  

• Do not install or place any acces-

sories (drink holder, cassette
holder, sticker, etc.) on the front
passenger's panel above the
glove box in a vehicle with a pas-
senger's air bag. Such objects
may  become dangerous projec-
tiles and cause injury if the pas-
senger's air bag inflates.

• When installing a container of liq-

uid air freshener inside the vehi-
cle, do not place it near the instru-
ment cluster nor on the instru-
ment panel surface.

(Continued)

(Continued)

If there is any leakage from the air
freshener onto these areas
(instrument cluster, instrument
panel or air ventilator), it may
damage these parts. If the liquid
from the air freshener does leak
onto these areas, wash them with
water immediately.

WARNING

• If an air bag deploys, there may

be a loud noise followed by a fine
dust released in the vehicle.
These conditions are normal and
are not hazardous - the air bags
are packed in this fine powder.
The dust generated during air bag
deployment may cause skin or
eye irritation as well as aggravate
asthma for some persons.
Always wash all exposed skin
areas thoroughly with lukewarm
water and a mild soap after an
accident in which the air bags
were deployed.

(Continued)

Passenger’s front air bag

Passenger’s front air bag

Summary of Contents for 2009 Entourage



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Entourage

Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
Camoplast T4S User Manual preview
T4S
Brand: Camoplast Pages: 60
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
John Gold Gold Cruuse Cruisecontrol GC90 Installation Manual preview
Gold Cruuse Cruisecontrol GC90
Brand: John Gold Pages: 24
Whispbar K498W Fitting Instructions Manual preview
K498W
Brand: Whispbar Pages: 14
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Wagan Wireless Handsfree Car Kit User Manual preview
Wireless Handsfree Car Kit
Brand: Wagan Pages: 20
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
Mynew Portable Car Umbrella User Manual preview
Portable Car Umbrella
Brand: Mynew Pages: 5
TATA Motors INDICA eV2 XETA CNG Supplemental Owner'S Manual preview
INDICA eV2 XETA CNG
Brand: TATA Motors Pages: 24
PAC AP4-GM61 Quick Start Manual preview
AP4-GM61
Brand: PAC Pages: 5

Brands by name

Popular brands

Load more brands