manualshive.com logo in svg

Hyundai 2007 Tucson, Owner'S Manual

The Hyundai 2007 Tucson Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for owners of this remarkable vehicle. Designed to enhance your driving experience, this manual can be downloaded for free from manualshive.com, ensuring easy access to vital information at your convenience.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

30

!

B230G02O-AAT

Child Restraint System Installation on
Outboard Rear Seats

WARNING:

o If the retractor is not in the Automatic

Locking mode, the child restraint can
move when your vehicle turns or stops
suddenly.  A child can be seriously in-
jured or killed if the child restraint is not
properly anchored to the car, including
setting the retractor to the Automatic
Locking mode.

o Do not install any child restraint system

in the front passenger seat. Should an
accident occur and cause the passenger
side airbag to deploy, it could severely
injure or kill an infant or child seated in
an infant or child seat. Therefore, only
use a child restraint system in the rear
seat of your vehicle.

To install a child restraint system in the outboard
rear seats, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has  engaged the Auto-
matic Locking feature by trying to extend web-
bing out of the retractor. If the retractor is in the
Automatic Locking mode, the belt will be locked.

After installation of the child restraint system, try
to move it in all directions to be sure the child
restraint system is securely installed. If you need
to tighten the belt, pull more webbing toward the
retractor. When you unbuckle the seat belt and
allow it to retract, the retractor will automatically
revert back to its normal seated passenger
Emergency Locking usage condition.

NOTE:

o Before installing the child restraint sys-

tem in any seating position, read the
instructions supplied by the child re-
straint system manufacturer.

o If the seat belt does not operate as de-

scribed, have the system checked imme-
diately by your authorized Hyundai dealer.

B235G03JM-B

Summary of Contents for 2007 Tucson



















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tucson

Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Brand: Gatorback Mudflaps Pages: 4
Yakima RimROC Instructions Manual preview
RimROC
Brand: Yakima Pages: 12
Axxess AXDSPX-VW1 Installation Instructions Manual preview
AXDSPX-VW1
Brand: Axxess Pages: 16
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13
NavLinkz RL4-ELINK Manual preview
RL4-ELINK
Brand: NavLinkz Pages: 23
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7
ZENEC ZE-RVC85WA Mounting Instructions preview
ZE-RVC85WA
Brand: ZENEC Pages: 2
Macally MAGME User Manual preview
MAGME
Brand: Macally Pages: 10
Volvo XC40 RECHARGE Retailer Pairing Manual preview
XC40 RECHARGE
Brand: Volvo Pages: 5

Brands by name

Popular brands

Load more brands