1
FEATURES OF YOUR HYUNDAI
27
To install the child restraint seat tether
1. Open the tether anchor cover on the rear
luggage compartment floor.
B230C05JM
Tether
anchor cover
Child Restraint
Hook Holder
2. Route the child restraint seat tether strap
over the seatback.
Rear luggage compartment floor
B230B01JM
Front of Vehicle
Child
Restraint
Hook
Holders
Tether Strap
Hook
!
For vehicles with adjustable headrests, route
the tether strap under the headrest and
between the headrest posts, otherwise route
the tether strap over the top of the seatback.
3. Connect the tether strap hook to the child
restraint hook holder and tighten to secure
the seat.
WARNING:
o Install the Child Restraint Seat fully rear-
ward against the seatback, with the
seatback reclined two positions from
the most upright latched position.
o A child can be seriously injured or killed
in a collision if the child restraint is not
properly anchored. Always follow the
child seat manufacturer’s instructions
for installation and use.
o Never mount more than one child re-
straint to a single tether or to a single
lower anchorage point. The increased
load caused by multiple seats may cause
the tethers or anchorage points to break,
causing serious injury or death.
Summary of Contents for 2007 Tucson
