manualshive.com logo in svg

Hyundai 2007 Tucson, Owner'S Manual

The Hyundai 2007 Tucson Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for owners of this remarkable vehicle. Designed to enhance your driving experience, this manual can be downloaded for free from manualshive.com, ensuring easy access to vital information at your convenience.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

121

121

121

121

121

8. SCAN

o Press the SCAN button to playback the first

10 seconds of each track.

o To playback the first 10 seconds of each

track in the selected folder, press the SCAN
button for 2 seconds or longer. (MP3 CD
only)

o Press the SCAN button again within 10 sec.

When you have reached the desired track.

9. BOOKMARK (MARK)

When the CD player unit is operating, the de-
sired track on the disc can be bookmarked by
using the MARK button.

o Press the MARK button to bookmark the

desired track for more than 2 seconds.
This will display the "

√

 " symbol on the LCD

with beep sound.
To play the bookmarked tracks, press the
MARK button within a second.

o Press the MARK button to erase the

bookmarked tracks for more than 2 sec-
onds.
This will erase the bookmark and "

√

" symbol

on the LCD with beep sound.

10. JOY STICK (ENT)

o You can skip the track by pushing the JOY

STICK to the left or right.
After selecting the desired track, press the
JOY STICK to playback the track.
If you do not press the JOY STICK within 5
seconds, the previous track will playback
again.

o You can move through the folder by pushing

the JOYSTICK to up and down.
After moving the desired folder, press the
JOYSTICK to playback the selected track.
If you do not press the JOYSTICK within 5
seconds, the previous track will playback
again. (MP3 CD only)

NOTE:

o To assure proper operation of the unit,

keep the vehicle interior temperature
within a normal range by using the
vehicle's air conditioning or heating
system.

o When replacing the fuse, replace it with

a fuse having the correct capacity.

o The bookmarks are all erased when the

car battery is disconnected or power off.
Therefore, all data will have to be set
again if this should occur.

o This equipment is designed to be used

only in a 12 volt DC battery system with
negative ground.

o This unit is made of precision parts. Do

not attempt to disassemble or adjust
any parts.

o When driving your vehicle, be sure to

keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

o Do not expose this equipment (includ-

ing the speakers and tape) to water or
excessive moisture.

Summary of Contents for 2007 Tucson



















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tucson

Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
WABCO OnSide MM16167 Maintenance Manual preview
OnSide MM16167
Brand: WABCO Pages: 52
KEKO K617 Installation Description preview
K617
Brand: KEKO Pages: 3
Movon MDAS-5 Installation Manual preview
MDAS-5
Brand: Movon Pages: 43
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
RHOX LGT-381L Installation Instructions Manual preview
LGT-381L
Brand: RHOX Pages: 8
Caraudio-Systems RL-LR12-TF Manual preview
RL-LR12-TF
Brand: Caraudio-Systems Pages: 9
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
TIS TISPLUS User Manual preview
TISPLUS
Brand: TIS Pages: 6
Jaeger 21360505J Fitting Instructions Manual preview
21360505J
Brand: Jaeger Pages: 13
BMW X1 2015 Owner'S Manual preview
X1 2015
Brand: BMW Pages: 242
Honda 2005 Civic Owner'S Manual preview
2005 Civic
Brand: Honda Pages: 234
NavInc USB-PEU-RD4 User Manual preview
USB-PEU-RD4
Brand: NavInc Pages: 5
Leer CAB HIGH SPORT BED CAP Installation Instructions & Owner'S Manual preview
CAB HIGH SPORT BED CAP
Brand: Leer Pages: 32

Brands by name

Popular brands

Load more brands