manualshive.com logo in svg

Hyundai 2007 Tucson, Owner'S Manual

The Hyundai 2007 Tucson Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for owners of this remarkable vehicle. Designed to enhance your driving experience, this manual can be downloaded for free from manualshive.com, ensuring easy access to vital information at your convenience.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

26

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combination,
making sure that its location is compatible with
that of the trailer or vehicle being towed.
Use a quality non-equalizing hitch which distrib-
utes the tongue load uniformly throughout the
chassis.

The hitch should be bolted securely to the car
and installed by a qualified technician. DO NOT
USE A HITCH DESIGNED FOR TEMPORARY
INSTALLATION AND NEVER USE ONE THAT
ATTACHES ONLY TO THE BUMPER.

C190C01Y-AAT

Trailer Brakes

If your trailer is equipped with a braking system,
make sure it conforms to federal and/or local
regulations and that it is properly installed and
operating correctly.

NOTE:

If you tow a trailer or vehicle, your car will
require more frequent maintenance due to
the additional load. See Maintenance Under
Severe Usage Conditions" on page 5-6.

C190D01S-AAT

Safety Chains

Should the hitch connection between your ve-
hicle and the trailer or vehicle you are towing fail,
the trailer or vehicle could wander dangerously
across other lanes of traffic and ultimately leave
the roadway. To eliminate this potentially dan-
gerous situation, safety chains, attached be-
tween your car and the trailer or towed vehicle,
are required in most states.

CAUTION:

o Never connect a trailer brake system

directly to the vehicle brake system.

o When towing a trailer on steep grades (in

excess of 6%) pay close attention to the
engine coolant temperature gauge to
ensure the engine does not overheat. If
the needle of the coolant temperature
gauge moves across the dial towards
"H" (HOT), pull over and stop as soon as
it is safe to do so, and allow the engine
to idle until it cools down. You may
proceed once the engine has cooled
sufficiently.

!

TRAILER OR VEHICLE TOWING

!

C190A01S-AAT

If you are considering towing with your car, you
should first check with your State's Department
of Motor Vehicles to determine their legal re-
quirements.
Since laws vary from State to State the require-
ments for towing trailers, cars, or other types of
vehicles or apparatus may differ. Ask your
Hyundai dealer for further details before towing.

CAUTION:

Do not do any towing with your car during
its first 1,200 miles (2,000 km) in order to
allow the engine to properly break in. Fail-
ure to heed this caution may result in seri-
ous engine or transaxle damage.

Summary of Contents for 2007 Tucson



















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tucson

UltraGauge EM Installation & Operation Manual preview
EM
Brand: UltraGauge Pages: 55
Yakima KingJoe 2 Quick Start Manual preview
KingJoe 2
Brand: Yakima Pages: 7
Yakima BowDown Quick Start Manual preview
BowDown
Brand: Yakima Pages: 6
Yakima LOCKN'LOAD Manual preview
LOCKN'LOAD
Brand: Yakima Pages: 10
Yakima HitchSki Quick Start Manual preview
HitchSki
Brand: Yakima Pages: 12
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
ULTIMATE SPEED 94600 Assembly And Safety Advice preview
94600
Brand: ULTIMATE SPEED Pages: 21
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
K40 ELECTRONICS K40 Platinum360 Owner'S Manual preview
K40 Platinum360
Brand: K40 ELECTRONICS Pages: 11
Edelbrock 5756 Installation Instructions preview
5756
Brand: Edelbrock Pages: 1
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3
Perrycraft SportQuest Series Installation preview
SportQuest Series
Brand: Perrycraft Pages: 2
ADAPT SOLUTIONS ASENTO EV-COLC15R Installation Manual preview
ASENTO EV-COLC15R
Brand: ADAPT SOLUTIONS Pages: 22
PMT AS7.M100.001 User Manual preview
AS7.M100.001
Brand: PMT Pages: 16
LaserLine 921K Operating Instructions preview
921K
Brand: LaserLine Pages: 4

Brands by name

Popular brands

Load more brands