manualshive.com logo in svg

Hyundai 2007 Tucson, Owner'S Manual

The Hyundai 2007 Tucson Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for owners of this remarkable vehicle. Designed to enhance your driving experience, this manual can be downloaded for free from manualshive.com, ensuring easy access to vital information at your convenience.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

15

!

CAUTION:

Driving with varying tire or wheel size may
cause the ESC system to malfunction. When
replacing tires, make sure they are the same
size as your original tires.

!

ELECTRONIC STABILITY
CONTROL (ESC) SYSTEM

C310A03JM-AAT

(If installed)

C310A01JM-U

The Electronic Stability Control (ESC) system
is designed to stabilize the vehicle during cor-
nering manuevers. ESC checks where you are
steering and where the vehicle is actually going.
ESC applies the brakes at individual wheels and
intervenes in the engine management system
to stabilize the vehicle.

The Electronic Stability Control (ESC) system
is an electronic system designed to help the
driver maintain vehicle control under adverse
conditions. It is not a substitute for safe driving
practices. Factors including speed, road con-
ditions and driver steering input can all affect
whether ESC will be effective in preventing a
loss of control. It is still your responsibility to
drive and corner at reasonable speeds and to
leave a sufficient margin of safety.

WARNING:

Never drive too fast for the road conditions
or too quickly when cornering.  Electronic
stability control (ESC) will not prevent ac-
cidents.  Excessive speed in turns, abrupt
maneuvers and hydroplaning on wet sur-
faces can still result in serious accidents.
Only a safe and attentive driver can prevent
accidents by avoiding maneuvers that
cause the vehicle to lose traction.  Even with
ESC installed, always follow all the normal
precautions for driving - including driving
at safe speeds for the conditions.

C310B01JM-AAT

ESC ON/OFF Mode

When the ESC is operating, the ESC indicator
in the instrument cluster will blink.
If you turn the system off by pressing the ESC
switch, the ESC-OFF indicator will come on and
stay on. In the ESC-OFF mode, the stability
control will be deactivated. Adjust your driving
accordingly. To turn the system back on, press
the switch again. The ESC-OFF indicator should
go off.

NOTE:

The ESC mode will automatically be turned
ON after the engine is turned off and re-
started.

Summary of Contents for 2007 Tucson



















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tucson

RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Bestop 54822 Installation Instructions Manual preview
54822
Brand: Bestop Pages: 11
Whispbar K455W Fitting Instructions Manual preview
K455W
Brand: Whispbar Pages: 14
Vauxhall 2014 Insignia VXR SuperSport Specifications preview
2014 Insignia VXR SuperSport
Brand: Vauxhall Pages: 56
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Brand: Toyota Pages: 35
Ford Windstar 2003 Quick Reference Manual preview
Windstar 2003
Brand: Ford Pages: 2
Subaru 2016 Outback Owner'S Manual preview
2016 Outback
Brand: Subaru Pages: 99
Axxess AX-AM-AU92 Installation Instructions Manual preview
AX-AM-AU92
Brand: Axxess Pages: 8
Curt Manufacturing 31048 Installation Instructions Manual preview
31048
Brand: Curt Manufacturing Pages: 6
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295

Brands by name

Popular brands

Load more brands