manualshive.com logo in svg

Hyundai 2007 Tucson, Owner'S Manual

The Hyundai 2007 Tucson Owner's Manual is a comprehensive guide that provides detailed instructions and essential information for owners of this remarkable vehicle. Designed to enhance your driving experience, this manual can be downloaded for free from manualshive.com, ensuring easy access to vital information at your convenience.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

3

!

!

WARNING:

o The 2WD Tucson is not designed for off-

road use. The 4WD Tucson is designed
primarily for use on paved roads. How-
ever, occasional use in off-highway con-
ditions such as established unpaved
roads and non-challenging off-road
trails is allowed. The 4WD Tucson is not
designed for blazing new trails, chal-
lenging off-road conditions, or unpaved
hill climbing. Exceeding the conditions
that were intended for the vehicle's pri-
mary design may result in injury or death.

o Utility vehicles have a significantly higher

rollover rate than other types of vehicles.

o Utility vehicle have higher ground clear-

ance   and a narrower track to make them
capable of performing in a wide variety
of off-road applications. Specific design
characteristics give them a higher center
of gravitiy than ordinary cars. An advan-
tage of the higher ground clearance is a
better view of the road allowing you to
anticipate problem. They are not de-
signed for cornering at the same speeds
as conventional 2-wheel drive vehicles
any more than low-slung sports cars are
designed to perform satisfactorily un-
der off-road conditions. If at all possible,
avoid sharp turns or abrupt maneuvers.
As with other vehicles of this type, fail-
ure to operate this vehicle correctly may
result in loss of control or vehicle rollover.

o In a rollover crash, an unbelted person is

significantly more likely to die than a
person wearing a seat belt.

WARNING:

RISK OF ROLLOVER

!

WARNING:

Your vehicle is equipped with tires de-
signed to provide for safe ride and handling
capability.
Do not use a size and type of tire and wheel
that is different from the one that is origi-
nally installed on your vehicle. It can affect
the safety and performance of your vehicle,
which could lead to handling failure or
rollover and serious injury.
When replacing the tires, be sure to equip
all four tires with the tire and wheel of the
same size, type, tread, brand and load-
carrying capacity. If you nevertheless de-
cide to equip your vehicle with any tire/
wheel combination not recommended by
Hyundai for off-road driving, you should
not use these tires for highway driving.

Summary of Contents for 2007 Tucson



















































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tucson

TATA Motors Nano Owner'S Manual & Service Book preview
Nano
Brand: TATA Motors Pages: 94
GÄN GA Manual preview
GA
Brand: GÄN Pages: 24
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
Yakima K674 Instructions Manual preview
K674
Brand: Yakima Pages: 13
Menabo 000081000000, Fitting Instructions Manual preview
000081000000,
Brand: Menabo Pages: 11
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412
ULTIMATE SPEED UAWSO 2 B1 Operation And Safety Notes preview
UAWSO 2 B1
Brand: ULTIMATE SPEED Pages: 32
Chevrolet 1998 Tahoe Manual preview
1998 Tahoe
Brand: Chevrolet Pages: 441
Cadillac 2001 Eldorado Owner'S Manual preview
2001 Eldorado
Brand: Cadillac Pages: 335
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
Belkin TuneBase F8Z442 User Manual preview
TuneBase F8Z442
Brand: Belkin Pages: 162
Ford transit connect 2012 User Manual preview
transit connect 2012
Brand: Ford Pages: 299
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2
Air Lift RideControl 59540 Manual preview
RideControl 59540
Brand: Air Lift Pages: 10
Opel 2016 Mokka Owner'S Manual preview
2016 Mokka
Brand: Opel Pages: 233
Edelbrock 65812 Installation Instructions preview
65812
Brand: Edelbrock Pages: 3

Brands by name

Popular brands

Load more brands