Hyundai 2007 Tucson Owner'S Manual Download Page 105

Page: 105 / 306

FEATURES OF YOUR HYUNDAI

HJM2117

Cool

Warm

B670E02A-AAT

Temperature Control

This control is used to adjust the degree of
heating or cooling desired.

B690A01E-AAT

For normal heating operation, set the air intake
control to the fresh air ( ) position and the
air flow control to the floor ( ) position.

For faster heating, the air intake control should
be set in the recirculate ( ) position.

If the windows fog up, set the air flow control to
the defrost ( ) position. (The A/C will be on
automatically and "Fresh" mode will be acti-
vated.)

For maximum heat, rotate the temperature
control to "Warm".

B690A01JM-A

HEATING CONTROLS

B670C03JM

OFF

Off-Level

Air is discharged through the windshield de-
froster nozzle, side defroster nozzle and side
ventilator.

NOTE:

If the air flow control is off, the air intake
control is set to the fresh mode automati-
cally.

Summary of Contents for 2007 Tucson



















































































































































































































































































































Search results

Summary of Contents for 2007 Tucson

Reviews:

Related manuals for 2007 Tucson

Brands by name

Popular brands

Hyundai 2007 Tucson, Owner'S Manual

Search results

Summary of Contents for 2007 Tucson

Reviews:

Related manuals for 2007 Tucson

Brands by name

Popular brands