manualshive.com logo in svg

Hyundai 2002 Sonata, Owner'S Manual, Page: 57 / 166

Share
Download
Hyundai 2002 Sonata Owner'S Manual Download Page 57

FEATURES OF YOUR HYUNDAI

1- 48

B600A01HP-GAT

STEERING WHEEL TILT LEVER

To adjust the steering wheel:

1. Pull the lever forward driver and hold it to

unlock.

2. Raise or lower the steering wheel to the

desired position.

3. After adjustment, release the lever.

WARNING:

Do not attempt to adjust the steering wheel
while driving as this may result in loss of
control of the vehicle and serious injury or
death.

1MS04009A-2

B600A02Y

B500D07O-GAT

POWER OUTLET (If installed)

These supply 12V electric power to operate
electric accessories or equipment only when
the key is in the "ON" or "ACC" position.

WARNING:

Do not use electric accessories or equip-
ment other than the Hyundai genuine parts
in the socket.

B610A02Y-GAT

HORN

Press the center hub on the steering wheel to
sound the horn.

B611A01Y-AAT

REAR SEAT ARM REST (If installed)

This arm rest is located in the center of the rear
seat back.

HEF-200

B611A02Y

Working Zone

Summary of Contents for 2002 Sonata







































































































































































Reviews:

No comments