manualshive.com logo in svg

Hyundai 2002 Sonata, Owner'S Manual, Page: 25 / 166

Share
Download
Hyundai 2002 Sonata Owner'S Manual Download Page 25

FEATURES OF YOUR HYUNDAI

1- 16

accident statistics provided by the National High-
way Traffic Safety Administration (NHTSA),
children are safer when properly restrained in
the rear seats than in the front seat. Larger
children should use one of the seat belts provid-
ed.
All 50 states have child restraint laws. You
should be aware of the specific requirements in
your state. Child and/or infant safety seats must
be properly placed and installed in the rear
seat. You must use a commercially available
child restraint system that meets the require-
ments of the Federal Motor Vehicle Safety
Standards (FMVSS).
Children could be injured or killed in a crash if
their restraints are not properly secured. For
small children and babies, a child seat or infant
seat must be used. Before buying a particular
child restraint system, make sure it fits your car
and seat belts, and fits your child. Follow all the
instructions provided by the manufacturer when
installing the child restraint system.

WARNING:

o A child restraint system must be placed

in the rear seat. Never install a child or
infant seat on the front passenger's seat.
Should an accident occur and cause the
passenger side airbag to deploy, it could
severely injure or kill an infant or child
seated in an infant or child seat. Thus,
only use a child restraint in the rear seat
of your vehicle.

B220C01Y-AAT

To Release the Seat Belt

B220C02Y

When you want to release the seat belt, press the
button in the locking buckle.

WARNING:

The rear seat center belt latching mecha-
nism is different from those for the out-
board rear seat shoulder belts. When fas-
tening the outboard rear seat shoulder belts
or the rear seat center belt, make sure they
are inserted into the correct buckles to ob-
tain maximum protection from the seat belt
system and assure proper operation.

B230A02Y-AAT

CHILD RESTRAINT SYSTEM

Children riding in the car should sit in the rear
seat and must always be properly restrained to
minimize the risk of injury in an accident, sud-
den stop or sudden maneuver. According to

B220A02Y

WARNING:

o When using the rear seat center belt, you

must lock all metal tabs and buckles. If
any metal tab or buckle is not locked, it
will increase the chance of injury in the
event of collision.

o Never unlock the metal tab (a) and the

buckle (b) with the following exceptions.
(1) In case of folding rear seatbacks down.
(2) If transporting an object on the rear

seat may cause damage to the rear
seat center belt.

o Lock the metal tab (a) and the buckle (b)

immediately after folding rear seatbacks
up.

o To disconnect the metal tab (a) from the

buckle (b) , insert a sharp-ended tool into
the groove located on the buckle (b).

Summary of Contents for 2002 Sonata







































































































































































Reviews:

No comments