Hyundai 2002 Sonata Owner'S Manual Download Page 63

Page: 63 / 166

FEATURES OF YOUR HYUNDAI

1- 54

B690A03Y-AAT

HEATING CONTROLS

For normal heating operation, set the air intake
control to the fresh air ( ) position and the air
flow control to the floor ( ) position.

For faster heating, the air intake control should
be set in the recirculate ( ) position.

If the windows fog up, set the air flow control to
the defrost ( ) position. The air intake control
will change to fresh mode automatically.

For maximum heat, move the temperature con-
trol to "Warm".

B740C01A-AAT

De-Humidified Heating

For dehumidified heating:

o Turn on the fan control switch.
o Turn on the air conditioning switch. The air

conditioning indicator light should come on
at the same time.

o Set the air intake control to the fresh air

( ) position.

o Set the air flow control to the face ( )

position.

o Adjust the fan control to the desired speed.
o For more rapid action, set the fan at one of

the higher speeds.

o Adjust the temperature control to provide the

desired amount of warmth.

HEF-045

HEF-046

Floor-Level

Air is discharged through the floor vents.

Floor-Defrost Level

Air is discharged through the windshield defrost
vents and the floor vents.
If the "Floor-Defrost" mode is selected, the air
intake control will change to "Fresh" mode.

Defrost-Level

Air is discharged through the windshield defrost
vents. If the "Defrost" mode is selected, the air
intake control will change to "Fresh" mode.

HEF-047

Summary of Contents for 2002 Sonata







































































































































































Search results

Summary of Contents for 2002 Sonata

Reviews:

Related manuals for 2002 Sonata

Brands by name

Popular brands

Hyundai 2002 Sonata, Owner'S Manual

Search results

Summary of Contents for 2002 Sonata

Reviews:

Related manuals for 2002 Sonata

Brands by name

Popular brands