manualshive.com logo in svg

Hyundai 2002 Sonata, Owner'S Manual, Page: 27 / 166

Share
Download
Hyundai 2002 Sonata Owner'S Manual Download Page 27

FEATURES OF YOUR HYUNDAI

1- 18

B230C02Y-AAT

Installing a Child Restraint Seat

1. Position the child restraint seat on the rear

passenger seat cushion.

2. Route the child restraint seat tether strap

over the back of the seat.
For vehicles with adjustable head restraints,
route the tether strap under the head re-
straint and between the head restraint posts,
otherwise route the tether strap over the top
of the seatback.

3. Locate the correct anchor on the rear seat

package tray for the selected seating posi-
tion.

WARNING:

The tether strap may not work properly if
attached somewhere other than the correct
tether anchor.

4. Open the tether anchor cover.

the vehicle's rear seat since this can make an
important contribution to safety. Your vehicle is
provided with three child restraint hook holders
on the rear seat package tray for installing the
child seat or infant seat.

B230C03Y

B230C04Y

5. Clip the tether strap hook to the tether strap

hook holder.

WARNING:

If the tether strap is clipped incorrectly, the
child restraint seat may not be restrained
properly in the event of a collision.

6. Tighten the tether strap to secure the seat.

Tether strap hook

Tether anchor cover

Tether strap hook holder

To install a child restraint system in the rear
seats, extend the shoulder/lap belt entirely from
its retractor until a "click" is felt. This will engage
the seat belt retractor automatic locking feature,
which allows the seat belt to retract but not
extend. Install the child restraint system, buckle
the seat belt and allow the seat belt to take up
any slack. Make sure that the lap portion of the
belt is tight around the child restraint system
and the shoulder portion of the belt is positioned
so that it can not interfere with the child's head
or neck. Also, double check to be sure that the
retractor has  engaged the Automatic Locking
feature by trying to extend webbing out of the
retractor. If the retractor is in the Automatic
Locking mode, the belt will be locked. After
installation of the child restraint system, try to
move it in all directions to be sure the child
restraint system is securely installed. If you

B230G03Y-AAT

Installation on Rear Seats

YR10400B

Summary of Contents for 2002 Sonata







































































































































































Reviews:

No comments