manualshive.com logo in svg

Hyundai 2002 Sonata, Owner'S Manual, Page: 146 / 166

Share
Download
Hyundai 2002 Sonata Owner'S Manual Download Page 146

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

6-18

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

The halogen bulb contains gas under pres-

The halogen bulb contains gas under pres-

The halogen bulb contains gas under pres-

The halogen bulb contains gas under pres-

The halogen bulb contains gas under pres-
sure and if impacted 

sure and if impacted 

sure and if impacted 

sure and if impacted 

sure and if impacted could shatter, resulting

could shatter, resulting

could shatter, resulting

could shatter, resulting

could shatter, resulting

in flying fragments. Always wear eye pro-

in flying fragments. Always wear eye pro-

in flying fragments. Always wear eye pro-

in flying fragments. Always wear eye pro-

in flying fragments. Always wear eye pro-
tection when 

tection when 

tection when 

tection when 

tection when servicing the bulb. Protect the

servicing the bulb. Protect the

servicing the bulb. Protect the

servicing the bulb. Protect the

servicing the bulb. Protect the

bulb against abrasions or scratches and

bulb against abrasions or scratches and

bulb against abrasions or scratches and

bulb against abrasions or scratches and

bulb against abrasions or scratches and
against 

against 

against 

against 

against liquids when lighted. Turn the bulb

liquids when lighted. Turn the bulb

liquids when lighted. Turn the bulb

liquids when lighted. Turn the bulb

liquids when lighted. Turn the bulb

on only when installed in a headlight. 

on only when installed in a headlight. 

on only when installed in a headlight. 

on only when installed in a headlight. 

on only when installed in a headlight. Re-

Re-

Re-

Re-

Re-

place the headlight if damaged or cracked.

place the headlight if damaged or cracked.

place the headlight if damaged or cracked.

place the headlight if damaged or cracked.

place the headlight if damaged or cracked.
Keep the bulb out of the reach 

Keep the bulb out of the reach 

Keep the bulb out of the reach 

Keep the bulb out of the reach 

Keep the bulb out of the reach of children

of children

of children

of children

of children

and dispose of the used bulb with care.

and dispose of the used bulb with care.

and dispose of the used bulb with care.

and dispose of the used bulb with care.

and dispose of the used bulb with care.

G290A05Y-AAT

HEADLIGHT AIMING ADJUSTMENT

HEADLIGHT AIMING ADJUSTMENT

HEADLIGHT AIMING ADJUSTMENT

HEADLIGHT AIMING ADJUSTMENT

HEADLIGHT AIMING ADJUSTMENT

Before performing aiming adjustment, make sure
of the following.
1. Keep all tires inflated to the correct pres-

sure.

2. Place the vehicle on level ground and press

the front bumper & rear bumper down sev-
eral times. Place vehicle at a distance of 118
in. (3m) from the test wall.

3. See that the vehicle is unloaded (except for

full levels of coolant, engine oil and fuel, and
spare tire, jack, and tools).

4. Clean the head light lenses and turn on the

headlights (Low beam).

5. Open the hood.
6. Draw the vertical line (through the center of

each headlight beam pattern) and the hori-
zontal line (through the center of each head-
light beam pattern) on the aiming screen.
And then, draw the parallel line at 0.827 in.
(21 mm) under the horizontal line.

7. Adjust each cut-off line of the low beam to

the parallel line with a phillips screwdriver -
VERTICAL AIMING

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

Horizontal aiming should be adjusted by an

Horizontal aiming should be adjusted by an

Horizontal aiming should be adjusted by an

Horizontal aiming should be adjusted by an

Horizontal aiming should be adjusted by an
authorized Hyundai Dealer.

authorized Hyundai Dealer.

authorized Hyundai Dealer.

authorized Hyundai Dealer.

authorized Hyundai Dealer.

Vertical
aiming

G290A03Y

G290B02Y-AAT

Adjustment After Headlight Assembly

Adjustment After Headlight Assembly

Adjustment After Headlight Assembly

Adjustment After Headlight Assembly

Adjustment After Headlight Assembly
Replacement

Replacement

Replacement

Replacement

Replacement

If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using the
aiming screen as shown in the illustration. Turn
on the headlight switch.
1. Adjust headlights so that main axis of light is

parallel to center line of the body and is
aligned with point "P" shown in the illustra-
tion.

2. Dotted lines in the illustration show the cen-

ter of headlights.

G290B02Y-1

Vertical
line

Cut-off line

Ground line

Horizontal line

L

W

H

H

"P"

0.827 in. (21 mm)

Summary of Contents for 2002 Sonata







































































































































































Reviews:

No comments