manualshive.com logo in svg

Hyundai 2002 Sonata, Owner'S Manual, Page: 145 / 166

Share
Download
Hyundai 2002 Sonata Owner'S Manual Download Page 145

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

DO-IT-YOURSELF MAINTENANCE

  6-17

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

Grinding noise from the power steering

Grinding noise from the power steering

Grinding noise from the power steering

Grinding noise from the power steering

Grinding noise from the power steering
pump may be heard immediately after the

pump may be heard immediately after the

pump may be heard immediately after the

pump may be heard immediately after the

pump may be heard immediately after the
engine is started in extremely cold condi-

engine is started in extremely cold condi-

engine is started in extremely cold condi-

engine is started in extremely cold condi-

engine is started in extremely cold condi-
tions (below - 4°F). If the noise stops during

tions (below - 4°F). If the noise stops during

tions (below - 4°F). If the noise stops during

tions (below - 4°F). If the noise stops during

tions (below - 4°F). If the noise stops during
warm up, there is no abnormal function in

warm up, there is no abnormal function in

warm up, there is no abnormal function in

warm up, there is no abnormal function in

warm up, there is no abnormal function in
the system. It is due to a power steering

the system. It is due to a power steering

the system. It is due to a power steering

the system. It is due to a power steering

the system. It is due to a power steering
fluid characteristic in extremely cold condi-

fluid characteristic in extremely cold condi-

fluid characteristic in extremely cold condi-

fluid characteristic in extremely cold condi-

fluid characteristic in extremely cold condi-
tions.

tions.

tions.

tions.

tions.

Recommended Fluid

Recommended Fluid

Recommended Fluid

Recommended Fluid

Recommended Fluid
Use PSF-3 type fluid

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

Do not start the engine when the power

Do not start the engine when the power

Do not start the engine when the power

Do not start the engine when the power

Do not start the engine when the power
steering oil reservoir is empty.

steering oil reservoir is empty.

steering oil reservoir is empty.

steering oil reservoir is empty.

steering oil reservoir is empty.

G240A01A-AAT

POWER STEERING HOSES

POWER STEERING HOSES

POWER STEERING HOSES

POWER STEERING HOSES

POWER STEERING HOSES

It is suggested that you check the power steer-
ing hose connections for fluid leakage at regular
intervals. The power steering hoses should be
replaced if there is severe surface cracking,
scuffing or worn spots. Deterioration of the
hose could cause premature failure.

G250A01A-AAT

FOR MORE INFORMATION ABOUT

FOR MORE INFORMATION ABOUT

FOR MORE INFORMATION ABOUT

FOR MORE INFORMATION ABOUT

FOR MORE INFORMATION ABOUT
YOUR HYUNDAI

YOUR HYUNDAI

YOUR HYUNDAI

YOUR HYUNDAI

YOUR HYUNDAI

If you desire additional information about main-
taining and servicing your Hyundai, you may
purchase a factory Shop Manual at your Hyundai
dealer's parts department.  This is the same

manual used by dealership technicians and
while it is highly technical it can be useful in
obtaining a better understanding of your car
and how it works.

G260A02A-AAT

REPLACING HEADLIGHT BULBS

REPLACING HEADLIGHT BULBS

REPLACING HEADLIGHT BULBS

REPLACING HEADLIGHT BULBS

REPLACING HEADLIGHT BULBS

Before attempting to replace a headlight bulb,
be sure the switch is turned to the "OFF"
position.
The next paragraph shows how to reach head-
light bulbs so they may be changed. Be sure to
replace the burned-out bulb with one of the
same number and wattage rating.

CAUTION:

CAUTION:

CAUTION:

CAUTION:

CAUTION:

Keep the lamps out of contact with petro-

Keep the lamps out of contact with petro-

Keep the lamps out of contact with petro-

Keep the lamps out of contact with petro-

Keep the lamps out of contact with petro-
leum products such as oil, gasoline etc.

leum products such as oil, gasoline etc.

leum products such as oil, gasoline etc.

leum products such as oil, gasoline etc.

leum products such as oil, gasoline etc.

G270A02Y-AAT

HEADLIGHT BULB

HEADLIGHT BULB

HEADLIGHT BULB

HEADLIGHT BULB

HEADLIGHT BULB

Replacement instructions:

Replacement instructions:

Replacement instructions:

Replacement instructions:

Replacement instructions:

1. Allow the bulb to cool. Wear eye protection.
2. Always grasp the bulb by its plastic base,

avoid touching the glass.

3. Disconnect the power cord from the bulb

base in the back of the headlight.

4. Push the bulb spring for removing the head-

light bulb.

5. Remove the protective cap from the re-

placement bulb and install the new bulb by
matching the plastic base with the headlight
hole. Retighten the bulb spring and recon-
nect the power cord.

6. Use the protective cap and carton to dis-

pose of the old bulb.

7. Check for proper headlight aim.

G270A03Y

High Beam

Low Beam

Turn signal Light

G270A04Y

High Beam (H1)

 Low Beam (H7)

T/Signal Light

Summary of Contents for 2002 Sonata







































































































































































Reviews:

No comments