HYT TR-800, Service Manual

Page: 25 / 90

TR-800 Service Manual
23
Bi-directional Repeater
Programming the Master Radio
1. Read the master radio and slave radio (The LED flashes red and then green during programming).
2. After the radios are read, click on the “+” indicator next to the “Master” option from the opened
HR800PE treeview window.
3. Double click on the “Accessories” option of “Per Radio” from the opened treeview menu of “Master “.
4. Click the drop down menu of “AUX3” and select “External PTT”. Select “Enable” from the
“Debounce” option.
5. Click the drop down arrow in “AUX5” and select “RX Tone”. Your screen will be shown in Figure 6-15.
Figure 6-15
6. Close the “Accessories” configuration screen.
7. Double click on the “Miscellaneous” option of “Per Radio”.
8. Click on the drop down menu of “Carrier Squelch Level” and select appropriate squelch level based
on field test and system requirements.
9. To eliminate squelch tail, click on the drop down menu of “CTCSS Tail Revert Option (Radians)” and
select 120° or 180° according to your system requirements.