HYT TR-800, Service Manual

Page: 16 / 90

TR-800 Service Manual
14
Figure 6-4
24. Select the “Miscellaneous” tab.
25. Check the “Squelch Tail Eliminator” box to eliminate unwanted noise (squelch tail) during loss of
carrier detection.
26. Assign an appropriate personality to a channel in the “Personality List” option. See the screen shown
in Figure 6-5.
27. Close the “Per Channel - n” window.
28. Double click on the “Per Zone - 1” option from the treeview menu of “Per Zone”.
29. Select the “Zone Channel List” tab.
30. Click the
Add
or
Insert
button to add a channel or
Del
button to delete it. All the channels here
should be programmed into the repeater. Assign the desired channel to “Channel” option. Verify the
number of channels is equivalent to that of the slave radio. Your screen will be shown in Figure 6-6.
31. Close the “Per Zone-n” window.