HYOSUNG NH-2700CE, Operator'S Manual

Page: 247 / 298

NH-2700CE 7. Appendix
7- 26
Error Code Description Trouble shooting
D170600
Line disconnected or Timeout before
receiving data from host 1. Check modem or Lan cable
2. Check host
D170700 NAK retry error.
1. Check modem or Lan cable
2. Check host
D170800 Send retry error
1. Check modem or Lan cable
2. Check host
D170900 Modem initialize fail Check modem
D171000 Modem Comport Failed Check modem
D180000 No Dial Tone(in Modem dial connection) Check telephone line connection. Test Modem.
D190000 No Answer(in Modem dial connection) Check telephone line connection. Test Modem.
D200000 Dial(Line) busy(in Modem dial connection) Try again later. Check phone number.
D220000 not receiving EOT from HOST
1. Check modem or Lan cable
2. Check host
D410000 CRC Mismatch Check host.
D410100 No CRC Received Make sure that the host is using CRC
DA0xxx0 Host Denial Error Refer to E7. Description for error code organization
F000100 Number of Bill is not inputted Enter number of bill. (required)
F000200
Parameter is not properly set (Surcharge
Owner)
Enter surcharge owner. (required)
F000300
Parameter is not properly set (Surcharge
Amount)
Enter surcharge amount. (required)
F000900 Master Key Index invalid Check Master key index.
F000A00 Master Key empty Enter Master key. (required)
F000B00 Host Phone Number is not inputted Enter Host phone number. (required)
F000D00
RMS Password is not inputted in RMS
Enable
Enter RMS password.
F000E00
RMS Phone Number is not inputted in RMS
Enable
Enter RMS phone number.