HYOSUNG NH-2700CE, Operator'S Manual

Page: 12 / 298

NH-2700CE 2. Precautions for Safety
3 2-
2.2 Description of Precaution Symbols
Symbol Description
Electrical Shock
• Do not remove cover. Only a maintenance engineer is allowed to open the cover.
• Do not touch. You may receive electric shock.
• Make sure to turn off the power when servicing the equipment.
High Temperature
• Do not touch the equipment when it is running.
• The equipment can get extremely hot and may cause a burn.
• Make sure to close the cover before running the equipment.
Be Careful when Moving
• The equipment is heavy. Make sure at least 2 people to lift or move the equipment.
• Do not attempt to move the equipment alone. You may be injured by dropping the
heavy equipment.
Fire Hazard
• Place the equipment in an area away from any combustible materials.
• The equipment may catch on fire from overheating or short circuit of the power
supply unit.
Disassembly
• Do not disassemble or modify the equipment unless you are a certified engineer.
• Contact the service center for maintenance, adjustments and repairs.
• Improper disassembly may cause fire or electrical shock.
Fall down
• Do not place the equipment where the floor cannot sustain the weight of the
equipment, or on slanted or unstable surface.
• Equipment may fall down and cause injury or damage.
Unplug the Equipment
• Stop using the equipment immediately if it smokes, emits an unusual smell, makes
abnormal sounds, or if liquids or other foreign materials enter the equipment.
• If the above-mentioned abnormalities occur, immediately turn off the power, unplug
the equipment and contact the service center.
• If you ignore these symptoms, the equipment may catch on fire or cause electric
shock.