HYOSUNG NH-2700CE, Operator'S Manual

Page: 157 / 298

NH-2700CE 5. Operator Function
5- 103
5.8.8 SYSTEM CONTROL
This
SYSTEM CONTROL
menu contains
SOFTWARE UPDATE, REBOOT, BACKUP ALL
JOURNAL TO USB, BACKUP JOURNAL BY DATE TO USB, BACKUP LOG TO USB, BACKUP
NVRAM, RESTORE NVRAM
and
CLEAR NVRAM.
Please press each button on this menu to go to next screen or to operate the related function. And if
you want to go back to the previous screen, press the
CANCEL
key in pinpad.
You can back up a various kinds of journal data and log data you want in this menu. Please make sure
that a USB drive is connected into the USB slot before pressing the button. When
BACKUP ALL
JOURNALS TO USB, BACKUP JOURNAL BY DATE TO USB
or
BACKUP LOG TO USB
button is
selected, this data will be sent into USB flash drive. When
SOFTWARE UPDATE
is entered, it will
exchange the current screen as shown as above for the screen of
SOFTWARE UPDATE
. This is
because Software Update functionality is supported at
SYSTEM CONTROL
menu. When
SYSTEM
CONTROL
is submitted, the files in USB flash drive will be copied to the ATM.
Terminal configuration data is saved at NVRAM, so
BACKUP NVRAM
and
RESTORE NVRAM
button
is to use the backup and restore terminal configurations.
NOTE:
1) How to update the software, please refer to the Appendix.
2) BACKUP NVRAM and RESTORE NVRAM Button is only displayed when a security door is opened.