hymer BMC 550, Instruction Manual

Page: 87 / 252

Living 6
B-MC - 12/18-2 - EHG-0016-01EN
87
The satellite antenna will automatically be aligned with a pre adjusted satel-
lite if the receiver system is within the reach of this satellite. The operation of
the satellite unit is not possible while the ignition is switched on.
1 Lighted display
2 OK Button
3 Next/Back buttons
4 On/Off button
Fig. 89 Control unit (satellite unit)
The lighted display shows information regarding the current operating status
of the satellite unit. To protect the battery, the lighting goes out after a while.

Switch the receiver on. The satellite antenna raises automatically after
starting up the receiver (up to 90 seconds).

Alternatively: Press On/Off button on the control unit.

The satellite unit will start the search with the most recently adjusted po-
sition. If the vehicle's location has changed, the fully automatic satellite
search will start. When the system has found the satellite, the selected
TV programme appears automatically.

Switch the receiver off. The satellite unit changes into idle mode. De-
pending on the adjustment, the satellite antenna will remain extended or
will be retracted.

Alternatively: Press On/Off button on the control unit. The satellite an-
tenna retracts.

Press the OK button. The satellite antenna's movement is stopped im-
mediately.

Press the Next and Back buttons until the desired menu item is dis-
played.

Press the OK button. The menu item is activated.

Press the Next and Back buttons to change adjustments.

Press the OK button to save adjustments.

Press On/Off button to abandon menu item without saving.

Further information can be obtained in the manufacturer's instruction
manual.
Switching on, erecting and
aligning:
Switching off, retracting:
Stopping the satellite
antenna:
Selecting and changing
adjustments: