hymer BMC 550, Instruction Manual

Page: 45 / 252

During the journey 4
B-MC - 12/18-2 - EHG-0016-01EN
45

Press the release button (Fig. 20,3).

Pull the headrest out upwards.

Plug the holding rod (Fig. 20,1) into the guide (Fig. 20,2).

Push the headrest downward until it reaches the desired locking
position.
4.11 Attachable seat

Use the seat only in the opposite direction to the direction of travel.
Depending on the model and level of equipment, an attachable additional
seat can be located in the storage space under the bench.
The attachable seat is equipped with a lap belt.
Fig. 21 Bench Fig. 22 Storage space under the
bench

Remove the seat cushions (Fig. 21,1).
Fig. 23 Place the attachable seat in
the holder Fig. 24 Secure the attachable seat
with wing nuts

Place the attachable seat (Fig. 23,1) in the holder (Fig. 23,2).

Fold the hinged half of the seat box lid upwards to obtain access to the
wing nuts on the rods.

Secure the attachable seat with wing nuts (Fig. 24,1).
Removing the headrest:
Fitting the headrest:
Installing the attachable
seat: