hymer BMC 550, Instruction Manual, Page: 32 / 252

3 Before the journey
32
B-MC - 12/18-2 - EHG-0016-01EN
3.5.1 Entrance step
The electrically operated entrance step makes it easier to enter and exit the
vehicle through the conversion door.
Depending on the model, the switch panel with the rocker switches is in-
stalled either in the dashboard or on the side, in the driver's door.
Fig. 7 Rocker switch for entrance
step (entrance area) Fig. 8 Rocker switch for entrance
step (switch panel)

Press the rocker switch (Fig. 7,1) in the entrance area or the rocker
switch (Fig. 8) on the switch panel in the driver's cabin.

Press the rocker switch (Fig. 7,1) situated in the entrance area.
When the engine is running and the entrance step is extended, a warning
tone is heard. The warning tone stops as soon as the entrance step is re-
tracted.
3.5.2 Driver's door step
The automatic step on the driver's door makes it easier to enter and exit
through the driver's door.

Open driver's door. The step extends automatically.

Close driver's door. The step retracts automatically.
3.6 Electrically heated windscreen

The windscreen will only be heated when the engine is running.

Each heating loop heats its respective half of the windscreen. If one
heating loop fails, the other half of the windscreen will continue to be
heated.
The windscreen heater is used to dehumidify a misted windscreen and to
defrost a frosted windscreen.
Depending on the model, the switch panel with the rocker buttons is in-
stalled either in the dashboard or on the side, in the driver's door.
Retracting:
Extending:
Extending:
Retracting: