hymer BMC 550, Instruction Manual

Page: 78 / 252

6 Living
78
B-MC - 12/18-2 - EHG-0016-01EN
6.5.3 Skylight with fan
 Do not switch on the fan without a fly screen. Do not put your hands or
fingers into the fan while it is running. Switch off the power supply be-
fore cleaning work.

A 4 A fuse (Fig. 75,4) protects the fan motor against overloading. If an
overload has occurred: Determine and correct the cause (e.g. dirty fan)
before replacing the fuse.

A contact switch switches off the fan when the skylight is closed. The fan
only runs when the skylight is opened a few centimetres.

To obtain optimum fan effect: Close all other skylights and open at least
one window.

Also read the manufacturer's instruction manual.
Fig. 75 Skylight with fan

Turn the rotary handle (Fig. 75,2) until the desired opening angle is
reached.

Turn the rotary handle until the skylight is closed.

Set the flip switch (Fig. 75,3) to "Aerate" (air flows from the outside in-
wards) or "Vent" (air flows from the inside outwards).

Set flip switch (Fig. 75,3) to the central position.

Turn the rotary switch (Fig. 75,5) to the desired setting:
0 = off
1 = slow
2 = medium
3 = fast

Turn the thermostat (Fig. 75,1) as far as possible in the "blue" direction.

When the desired temperature is reached: Turn the thermostat in the
"red" direction until the fan switches off. When the temperature rises
again, the fan switches back on again.

Turn the black cover (Fig. 75,4) counterclockwise a quarter of a turn.

Remove the cover by pulling it carefully downwards. The fuse is located
on the rear side of the cover.

Check if the wire inside the fuse is torn.
Opening the skylight:
Closing the skylight:
Aerating/venting:
Switching off the fan:
Adjusting the fan speed:
Adjusting the temperature:
Replacing fuse: