![background image](http://html1.mh-extra.com/html/hymer/bmc-550/bmc-550_instruction-manual_2192970159.webp)
Appliances 9
B-MC - 12/18-2 - EHG-0016-01EN
159
When the room temperature set on the remote control is reached, the com-
pressor switches itself off and the yellow LED in the IR receiver goes out.
The circulation fan continues to run.
When the room temperature falls below the set temperature, the unit auto-
matically switches itself back to heating mode.
Press the On/Off button (Fig. 174,2).
Press the mode selection button (Fig. 174,6) until the air circulation sym-
bol appears in the display (Fig. 174,1).
Use the "+" and "–" buttons (Fig. 174,3) to set the desired temperature.
Use the " " selection button (Fig. 174,5) to set the desired fan level.
In air circulation mode, the inside air is circulated and is cleaned by the filter.
No LEDs light up in the IR receiver.
1
Buttons for setting the time and the
timer
2
Send button (repeat data transfer)
3
Micro button "RESET" (resetting to
the factory setting)
4
Setup button for start-up
5
Light button (for operating the
lighting)
6
Soft-start button (for quiet cooling
operation)
7
Time button (for setting the time)
8
"TIMER" buttons for switching time
preselection on/off
Fig. 176 Remote control with setting
buttons (air conditioning
unit)
Press the soft-start button (Fig. 176,6). The fan then runs at low speed
in cooling mode, which makes it especially quiet.
Press the time button (Fig. 176,7).
Set the hours and minutes with the buttons (Fig. 176,1).
Press the On/Off button (Fig. 174,2).
Set the desired mode and temperature.
Press "ON" button (Fig. 176,8).
Press the buttons for setting the time (Fig. 176,1) until the desired time
span until switch-on is reached.
Press "ON" button (Fig. 176,8).
Press "OFF" button (Fig. 176,8).
Press the buttons for setting the time (Fig. 176,1) until the desired time
span until switch-off is reached.
Press "OFF" button (Fig. 176,8).
Press the "ON" or "OFF" button (Fig. 176,8) again.
The integrated timer enables the switch-on/switch-off time for the air condi-
tioning unit to be set between 15 minutes and 24 hours in advance (calcu-
lated from the current time).
Press the light button (Fig. 176,5). The light is switched on at the last set
dimming level.
Switching on air circulation:
Activating soft-start:
Setting the time:
Switching on the timer:
Programming the switching
on time:
Programming the switch-off
time:
Deactivating the timer:
Switching on the lighting:
Summary of Contents for BMC 550
