Page 15
5. Installation
Warning:
Installation of this unit to be attempted only b y quali-
fied personnel. We accept no liability for damage due to fau lty
installation.
Obey all safety notes and warnings present on the unit.
During installation the unit must be disconnected from its power
supply.
Attaching or inst alling addition al co mponents is permitted o nly
with the written co nsent of the manuf acturer, or else the war-
ranty is void.
5.1 Steam Humidifier Operating Environment
Note:
When selecting the installation site for the steam humidi-
fier, note that:
•
Ambient temperature must be between 5° and 40° C.
•
Relative humidity must not exceed 80% RH.
•
The minimum clearances indicated in the diagram
below must be observed; these are necessary to
ensure adequate ventilation for the housing.
•
The rear panel of the steam humidifier heats up during
operation (to a maximum of 60°C).
Take care that the
construction on which the unit is mounted is not made
of temperature-sensitive material.
•
Place the steam humidifier so that the unit is easily
accessible with sufficient space to perform mainte-
nance.
•
Make sure that there are no people and bearing materi-
als below the steam cloud (approx. 3 meters in exhaust
direction).
•
The steam humidifier is not qualified for exterior appli-
cations.
Summary of Contents for MiniSteam MS 10
