Page 26
7.3 Safety Interlock
Note:
Install contact interlocks, i.e. max. hygrostat, vane relay,
pressure controller, air inte rlock, in series bet ween terminals 1
and 2.
Warning:
A max-hygrostat should be installed in the safety inter-
lock. Th e max-hygrost at act s as a safety device in case the
humidity sensor malfunctions.
Warning:
Cont acts laid between terminals 1 and 2 mu st be
potential free and rated for 230V switches.
7.4 Wiring Diagram
Please remo ve the wiring diagr am from th e tech nical ma nual
supplied with the control used with your humidifier. Every steam
humidifier comes with one technical manual for the unit and one
for the control.
7.5 Electrical Installation Checklist
Perform e lectrical inst allation checks in compliance with cus-
tomer site requirements and public power utility regulations:
Is the power grid voltage compatible with the voltage on
the name plate?
Have all electrical connections been made according to
the terminal connection diagram?
Have all electrical cable and plug connections been
properly tightened?
Are all electrical socket connections secure?
Is the unit grounded?
After this check the unit can be switched on.
Warning:
The unit must be closed and locked. This guarantees
that the cover is g rounded. (only humidif ier type HyLine and
MiniSteam)
Note:
For initial o peration, control, service, malf unctions, and
circuit diagrams, consult the operation instructions for the Hygro-
Matik-controls.
Summary of Contents for MiniSteam MS 10
