Page 32
Reassembly
»
Connect plug (10) to level sensor.
»
Connect plugs (4) to electrodes.
Warning:
The plug must be pressed down onto the electrode as
far as it will go.
Note:
Connect plugs to the correct electrodes. Note the color of
the knurled nut.
Note:
Condensate connection must be showing in th e front on
the left.
»
Push in safety fuses.
insert new O-ring
connect upper and lower
part with clamps
remove used O-ring
insert new O-ring
remove old O-ring
insert new O-ring
place cylinder vertically
into cylinder base
Summary of Contents for MiniSteam MS 10
