Hydropool 13FFP Aquaplay, Owner'S Manual

Page: 33 / 65

33
If you need to replace a transmi er or pair your transmi ers again, power up the home
transmi er and press on its pairing bu on with a paper clip. The status light of the transmi er
will blink yellow.
Then, shut off the spa’s breaker to turn the spa transmi er off. Wait a li le and put the
breaker back on. Within a few seconds, pairing will be completed and both transmi er status
lights will turn to blue.
4. Transmi ers status LED indicator
Both the home and spa transmi ers have color status LED that can be used for
troubleshoo ng purposes
.
When the LED status is blinking (blue, green or red) this indicates that the communica on between the EN
module and the CO module it not established.