
19
HYDROPOOL SWIMSPA AQUAPLAY SERIES CONTROL SYSTEMS
INITIAL START
-
UP
Before applying voltage to power
-
up your hot
tub, it is very important that you understand
the sequence of events that occur when the
system is ac vated in order that the pump(s)
can be primed efficiently and damage to the
system can be avoided.
PROGRAM MENU
The program menu is accessible by holding
down the Light Key for 5 seconds. In the
Program Menu the following parameters can
be set: clock, filter or purge cycles, economy
mode and temperature units. While in the
program menu, use the Up and Down keys
(Up/ Down Key) to adjust the parameters and
the Light key to jump to the next parameter.
The changes will be saved a er the
confirma on of the last parameter only. If
there is no ac on taken for 10 seconds, the
system will exit the program menu without
saving any changes.
SETTING THE CLOCK TIME
Enter the program menu by holding down the
Light Key for 5 seconds. The display will show
the current clock se ng with the hour
flashing. Use the arrow keys to adjust the
hour. Press the Light Key to adjust the
minutes. Press the light key to jump to the
next parameter or to the end of the
parameters to save the me.
TEMPERATURE
CONTROL FUNCTIONALITY AND
ADJUSTMENT
A er you exit the programming mode your
hot tub will automa cally heat to the factory
preset default temperature of 38°C (100°F).
The temperature shown on the screen is the
current water temperature. Use the UP and
DOWN bu ons to set the desired
temperature.
The set point icon will appear at the top of
the screen. A er 3 seconds without any
change to the set temperature value, the
keypad will resume the normal display.
STANDBY MODE
Pressing the JET key for 5 seconds will enable
the Standby Mode. This mode allows you to
stop all outputs including automa c
func ons such as the filter cycle, heat
request and smart winter mode for 30
minutes to perform quick spa maintenance.
When ac ve, the display will toggle between
the “OFF” message, the clock and water
temperature
.
Summary of Contents for 13FFP Aquaplay
Page 62: ...62 IN YE 3 EU WIRING DIAGRAM ...
Page 63: ...63 IN YE 3 NA WIRING DIAGRAM ...
Page 64: ...64 IN YE 5 EU WIRING DIAGRAM ...
Page 65: ...65 IN YE 5 NA WIRING DIAGRAM ...