HydroMatik HeaterCompact Manual Download Page 34

Page: 34 / 78

Page 34

5.10 Steam Solenoid Valves

When humidifying a number of loads, which are to be controlled

separately, using a sin gle steam hu midifier, steam solenoid

valves can be included in the steam hoses. Valve control has to

provided by the customer.

•

Install the vertical risers with flow from bottom to top.

•

The best position is just above the steam humidifier.

Installation of Steam Solenoid Valve

5.11 Unit Installation Check

Attention:

This unit may only be operated by qualified and prop-

erly trained personnel.

Please check the installation using the following list:



Does unit hang vertically?



Are wall distances to the unit within the range



Does steam hose have a slope of 5-10%?



Is condensate hose installed with a loop of min. 200

mm?



Is steam manifold positioned correctly? Are all bolts and

clamps tightened?

Summary of Contents for HeaterCompact















































































Search results

Summary of Contents for HeaterCompact

Reviews:

Brands by name

Popular brands

HydroMatik HeaterCompact, Manual

Search results

Summary of Contents for HeaterCompact

Reviews:

Brands by name

Popular brands