33
Rev. 04082020
Boat Fitment
Take care to clear shafts, through hull fittings, strakes, etc. The boat
’
s keel must NOT rest on a cross beam
and should clear the beam by at least
1”.
The boat
’
s Center of Gravity (CG) must be in the center of the
lift bow to stern and port to starboard. This evenly distributes the load over the lift, allowing for maxi-
mum lift height and level operation.
It is the responsibility of the End User to ensure that:
•
The lift is installed by a certified HydroHoist Installer
•
The lift is operated in a safe manner
•
Regular inspection is performed on the lift components
•
Customer has read and understands all safety and warning labels
No alterations or modifications may be made to HydroHoist equipment without the express
written consent of HydroHoist. Re
-
installation, adjusting the bunks, and/or adjusting the tank beam
spacing must be performed to the standards of HydroHoist. It is the obligation of the End User to in-
form all equipment operators of the above conditions. Additional Owner Manuals and Safety Warning
Decals are available by request.
Summary of Contents for HarborHoist HH-4400
Page 1: ...1 Rev 04082020 ...
Page 35: ...35 Rev 04082020 Appendix ...
Page 38: ...38 Rev 04022020 ...
