Hydro-Logic
®
Flexi Logger 100
User Manual
6 April 2018
Page 45 of 62
External antenna configuration
The default configuration is
internal antenna only
. When an external antenna is
connected, the Hydro-Logic
®
Flexi Logger 100 needs be configured with Harvest
to scan both antennas and use the best signal. To do this, enable the tick box as
shown below, and configure the logger with this setting:
Do not enable the external antenna if one is not fitted
– the logger will try to
use it and reduce the battery life.
Sending data to a server
Timeview
Do not change the parameters here unless you are using your own telemetry
server. The ones shown below work for Timeview.
Other systems
The Hydro-Logic
®
Flexi Logger 100 supports many SCADA systems that use the
to discuss your requirements. Currently,
the Hydro-Logic
®
Flexi Logger 100 requires special firmware to support DNP3.
