Hydro-Logic
®
Flexi Logger 100
User Manual
6 April 2018
Page 42 of 62
Configuring sensors
Pre-wiring and configuration service
, the logger will already be
correctly configured for your sensor and you can skip this part.
These tabs are used for sensor configuration:
Press the Change Sensor tick box (1) to access the list of applicable sensors for
this channel
The drop-down list shows sensors that apply to this channel
– they will be
different if you are on a digital channel or 4-20mA.
Once the sensor is selected, you can configure it further, depending on the
sensor type. See the section on
