22
Slave Controller Replacement
Remove the top cover (see cover removal).
Open the cleaning solution drawer.
Remove the 7mm hex screw holding the top of the panel above the solution drawer. This screw is
accessible with top cover removed from inside unit.
Slide a flat screwdriver under the top panel and pry it loose.
Set the panel on top of the unit.
Disconnect the controller plugs and red, white & blue wires from 3 pin terminal strip.
Remove two screws holding controller panel to frame.
Turn frame over to access controller.
Squeeze the two tabs by the display on the controller and push the controller out of the back of the
frame.
3 Pin Connector
Controller Plugs
Screw
Screw
Summary of Contents for L110W
Page 1: ...Hydrim L110W Training Manual Training Manual ...
Page 4: ...4 ...
