Page 1-5 : CTS 450 Owner’s Manual
Hot Carbonating Truckmount System
CTS 450
14. Vacuum System
When machine is being run for test purposes and the vacuum inlet on top of the machine
is open, caution should be used.
To protect the vacuum blower from over loading and damaging itself, there is a vacuum
relief system installed on the vacuum tank. When the vacuum tank inlet is completely
sealed off, a maximum of 12 inches Hg will be attained. At the end of each day, an oil
based lubricant should be sprayed into the blower lubrication port before shutting down
the machine. If this operation is not performed daily the vacuum blower will develop rust
deposits from moisture and will decrease the life of the vacuum blower.
15. Vacuum Tank
Foam passing through the blower could lead to equipment malfunction. Therefore, it is
important to keep the vacuum tank foam free.
16. Vacuum Hose
Do not leave the vacuum hose unattended during operation. This could cause bodily
injury.
WARNING
!
WARNING
!
CAUTION
!
Summary of Contents for CTS 450
Page 2: ......
