HydraMaster Corporation
Page 1-8 : CTS 450 Owner’s Manual
CTS 450
Hot Carbonating Truckmount System
The preferable vehicle for the CTS 450 Truckmount installation is either a cargo van or a
minivan with a heavy-duty suspension package. The van should have a minimum 1/2 ton
capacity.
Be cautious when drilling any holes through the van floor. Many vans have critical compo-
nents mounted directly below the van floor that could be damaged by a misplaced drill bit.
TRUCK PREPARATION
The manufacturer recommends a spray-on bed liner or the installation of plywood floor-
ing, in the vehicle prior to installation of machine.
This provides a metal-to-cushion mounting rather than metal-to-metal, insulation and makes
an attractive van interior.
Materials Needed:
1. 2 sheets 4 x 8 x 5/8" exterior plywood
2. 1 Gallon Polyurethane Wood Sealer
3. 16 - 1½” sheet metal screws
(See
Figures 1-1 and 1-2
for correct placement of plywood flooring)
Roof Vents
Harris Research strongly recommends installing roof vents in vehicles operated in hot
weather locations.
Vehicle Preparation
Summary of Contents for CTS 450
Page 2: ......
