Page 1-9 : CTS 450 Owner’s Manual
Hot Carbonating Truckmount System
CTS 450
PLACEMENT OF UNIT IN VEHICLE
There are two recommended unit placements, side door and rear door. These recom-
mended placements are described below and illustrated in
Figure 1-3
.
SIDE DOOR:
Most installations are side door. This provides rear access for accessories and hoses as
well as unobstructed access to the component/working side of the
machine, thus making it a bit easier to perform maintenance and/or repair without remov-
ing the unit from the truck.
REAR DOOR:
Although this location partly limits working access, it does direct the noise away from the
cleaning site. Some cleaners in the colder areas prefer this location because it puts the
weight over the rear wheels for better traction in ice and snow. Rear mounting requires
the unit to be slid to the right side as far as possible.
This not only provides adequate working space on the component side of the unit but also
improves weight distribution inside the van (engine and component weight line up over
drive shaft). Also, it is physically easier to load the unit into the rear door due to the height
of the van bed.
Figure 1-3
Recommended Placement
Summary of Contents for CTS 450
Page 2: ......
