CTS 400 Flex Owner’s Guide: 22
5.
Set the temperature to the desired level on the “TILE/STONE TEMPERATURE”
control knob.
6.
Adjust the “PRESSURE REGULATOR” located on the left hand side of the machine
(see Figure 5), to the desired cleaning pressure level.
7. Optional: Press the Auto Pump Out (APO) switch to the “ON” position.
The PUMP OUT system will not engage until the water level rises inside the
recovery tank.
8. Now proceed with cleaning operation.
Never perform cleaning operations when the truckmount engine is running at
IDLE throttle position. Failure to follow this caution will increase the risk of serious
component or engine damage.
The machine will automatically shut down when it reaches its full capacity due
to the float switch located inside the recovery tank. When this occurs, turn the
Solution Control switch to “OFF” and empty the recovery tank. Then, turn the unit
back on and continue to clean.
Figure 5. Side View of CTS 400 Flex Console
Pressure
Regulator
