HYDAC FILTER SYSTEMS GMBH
Performing Maintenance | 8
MoWa OLS10-Z-x 4573340 en-us web
49 / 72
11. Moisten the O-ring on the coalescing element lightly with the
operating fluid.
12. Insert the new coalescing elements into the element recepta-
cles by screwing them in lightly.
NOTICE! Do not use an impact tool
.
13. Mount the element holding plate and tighten the 3 wing nuts
firmly.
14. Turn the coalescing element set by 180° and insert the coa-
lescing element set into the coalescing housing.
Note that the coalescing element set only fits into the coa-
lescing housing in one position (Z).
15. Clean the sealing surface on the cover.
Check the O-ring for damage. Replace it if necessary.
16. 1. Place the cover on the coalescing housing.
2. Place the housing clamp over the coalescing housing.
1
2
3
4
5
6
7
8
9
A
